Installing a steel patio door security or two can help protect unwanted mail for your home. Steel security doors are available in many fashionable colors and styles to suit your home decor. The installation typically takes one hour or less. Measure your door width and height. Examine the brick mug around your current door to make sure it is at least 1 inch with 1 inch with 1 inch. The brick shape is trim around outside the edge of the door frame and is what the new patio door security will add. Pry your old brick shape with a copper if it is to be replaced. You can use it for a template for the new brick shape; try to keep it in one piece.
Then for install steel patio door security, cut new brick mold to length and width using a chopped saw or hand saw. Set chop on the long table and put it in. The table helps to support the brick shape while making your cuts. Put the brick shape to the door with penny nails and hammer. Place the nail through the brick shape about every 2 feet that work your way around the entire door.
13 Picture Gallery: Install Steel Patio Door Security
Install the door frame by tightening the safety level through pre drilled holes. And then use a battery drill and a specialized safety bit. The halter is used on patio door security have safety heads that look like they are smashed down. This makes it harder for the door to be removed. Then help keep the door as you walk side to side and install halves. Level up as you go.
This post topic: Patio Door