How to lay hardwood flooring on stairs – Starting with remove carpet. Remove any nails or staples with the claw part of a hammer or needle-nose pliers. Remove the nose. This is the rounded wooden piece on the edge of each staircase. Insert a crow bar under the snout on the edge of the ladder and push the handle down to remove the snout piece. If the existing staircase is a piece, draw a straight line on the ladder directly above the front edge of the riser.
The riser is the front of the ladder that makes it rise from the one below. So, for the next steps of how to lay hardwood flooring on stairs is, cut the pry along this line with a circular saw. Measure the scales individually. This is important because each scale will not be the same width. Cut the hardwood stairs steps for every single scale for the measurement you took in step. Apply a thick bead of construction glue to the existing stair tread pattern. It is important to use a lot of adhesive because it acts as a leveler and can prevent the scale of moving and squeaking following.
27 Picture Gallery: How to Lay Hardwood Flooring On Stairs
Arrangement for browsing along the edge of the newly installed steps. Measure and cut the snuff for each scale individually. Apply a layer of construction adhesive to the back of the nosing. Secure it to the front edge of the tread. Fasten with 2-inch steel nails. Use a nail attached to push the nail head under the surface of the hardwood. Put the nail fixed on the nail head and touch with a hammer. And the steps of how to lay hardwood flooring on stairs were done.
This post topic: Stairs Hardwood